Certification Information

EN ISO 14116

Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing

EN ISO 14116 specifies the performance requirements for the limited flame spread properties of all materials, all material assemblies, and protective clothing in order to reduce the possibility of the clothing burning when in occasional and brief contact with small flames and thereby constituting a hazard. Additional requirements for EN ISO 14116clothing are also specified, including design requirements, mechanical requirements, marking, and information supplied by the manufacturer.

When protection against heat hazards is necessary, in addition to protection against flame, this International Standard is not appropriate. International Standards such as EN ISO 11612 are to be used instead.

Index

This norm is divided into three index, to indicate that the material of material assembly has achieved a specific level of performance.

 

Index 1

Limited flame spread.
No flaming or molten debris.
Afterglow time shall be less than 2 seconds.
 
Index 2

Advanced limited flame spread.
No flaming or molten debris.
Afterglow time shall be less than 2 seconds.
No holes larger than 5mm in any direction will form.

Index 3: (EN 15025)

Advanced limited flame spread.
No flaming or molten debris.
Afterglow time shall be less than 2 seconds.
Afterflame time shall be less than 2 seconds.
No holes larger than 5mm in any direction will form.

 

 

Want to know more?
Don’t hesitate to contact us for more information about certification and norms!

 

 

Looking for safety wear that reach these norms?

 

Items 28 to 36 of 68 total

SAFETY INSPIRES CONFIDENCE
CONFIDENCE INSPIRES ACHIEVEMENT
© 2022 DAPRO - Your Safety